Mosly Posted October 21, 2021 Share Posted October 21, 2021 Does anyone know how big I should be printing the STL of the Stargate for a 1' square gird so it will be the appropriate size? If I am looking at the numbers correctly, would it be a 4x4 miniature then on the board? Just wondering if anyone has made there's yet and how big. Link to comment Share on other sites More sharing options...
1001100x02 Posted October 23, 2021 Share Posted October 23, 2021 The gate is supposed to be 22 feet (6.7 m) wide, so at the standard 1" = 5ft/1.5m, you're looking at 4.4 inches Link to comment Share on other sites More sharing options...
velvetsanity Posted November 8, 2021 Share Posted November 8, 2021 (edited) When printing the gate at the default 100% size of the model, it comes out at 5-3/8", which is a bit larger than the proper scale size. Hope that helps you calculate scaling/resizing in your slicer. Edited November 8, 2021 by velvetsanity Link to comment Share on other sites More sharing options...
Recommended Posts