CaptMartyn Posted January 28, 2021 Share Posted January 28, 2021 "Activating a DHD typically takes 1 minute and a DC 20 Engineering or Science check." This can't be right. Dialing a DHD is the definition of Push to Start. As long as the team knows their actual home(Phoenix site) address it shouldn't even take a check as it's as mundane as possible. Logging into a password protected wifi is more complicated. Link to comment Share on other sites More sharing options...
BionicMan05 Posted February 1, 2021 Share Posted February 1, 2021 Which one are you looking at? I know there's tests for fixing/messing around with DHDs or manually dialing gates, but activating one is usually just a matter of time and sometimes a check to remember an address if under pressure. Link to comment Share on other sites More sharing options...
CaptMartyn Posted February 1, 2021 Author Share Posted February 1, 2021 7 minutes ago, BionicMan05 said: Which one are you looking at? I know there's tests for fixing/messing around with DHDs or manually dialing gates, but activating one is usually just a matter of time and sometimes a check to remember an address if under pressure. It's in chapter 9 preview on Google Drive. Page 116 in a red text box titled The Dial Home Device Link to comment Share on other sites More sharing options...
BionicMan05 Posted February 1, 2021 Share Posted February 1, 2021 Huh, must have missed that when I read over it. That is an odd wording since even on screen it maybe takes 30 sec when carefully dialing. Link to comment Share on other sites More sharing options...
Stanleyspots Posted March 1, 2021 Share Posted March 1, 2021 as long as the node you remove is correct it should be fine, I can only guess that youre removing it more than one time i.e: in the main loop. Link to comment Share on other sites More sharing options...
Recommended Posts