Crazey Wayne Posted July 16, 2021 Share Posted July 16, 2021 I am wondering other than the standard page cut and put together, does anyone have the size of the complete map sections so I can see about getting them printed via one giant page. IE: Floor 0 ground level one large paper printed map. Thanks in Advance Link to comment Share on other sites More sharing options...
Commodore Posted September 28, 2021 Share Posted September 28, 2021 Ground Floor min size is 29 wide and 29 tall. Floor -1 min size is 30 wide and 31 tall. Floor -2 min size is 29 wide and 25 tall. Floor -3 min size is 30 wide and 29 tall. That said, if they were stacked on top of each other based on the freight elevator. AND if you care if they line up Then the facility as a whole is 35 wide by 31 tall. On top of that I would add a half inch bleed around the edge, as many levels but up to the side of this box. So I am printing my maps at 36 wide by 32 tall, after I clean up errors in how some of them come together... More on sizing the cut map pages are 8 by 10 squares, each square is 300 pixels for a 300 dpi printing. Do not scale them when you print to insure 1" squares. The High level pages are not scaled the same. (Floor -3 is about 81.4 dpi, Floor -2 is about 90 dpi, Floor -1 is about 73.5 dpi, Floor 0 is about 82.5 dpi) Link to comment Share on other sites More sharing options...
LordJackel Posted October 25, 2021 Share Posted October 25, 2021 I have a standard laser jet, how do I print them so the grids are 1”. We like to use miniatures for game play, so I need to print the map to scale. Please help. Link to comment Share on other sites More sharing options...
1001100x02 Posted November 5, 2021 Share Posted November 5, 2021 Does your printer have the option to print the images unscaled, ie not trying to adjust them to the size of the paper used? Link to comment Share on other sites More sharing options...
Recommended Posts